Adapter not detected when connected to PS4?
Posted: Fri Oct 07, 2016 11:23 pm
Adapter Specs:
Wiring (Shitty GIMP edit w/ the hardware I'm using):
Yesterday I had set up my adapter and flashed the proper firmware with no issues. When I run GIMX with both the CP2102 and the AVR board connected to my PC GIMX detects the adapter and firmware just fine. When I connect to the board to my PS4, however, it no longer detects the adapter... wat do?
Also here's the output when it fails:
Edit: Something else I noticed is that gimx seems to alternate between 'can't read packet header' and 'can't read packet data' when I run it; not sure if that's useful; I'm thinking my PS4 is having troubles picking up the board when I plug it in? There's not any sort of visual/auditory feedback when I unplug and replug the board to the console...
Code: Select all
- CP2102 USB to Serial
- atmega32u4 Pro Micro AVR Board
- Arch Linux / Windows 10 ( Linux on Desktop, Windows on Laptop, problem persists on both platforms )
- EMUPS4/atmega32u4.hex Firmware ( I've reflashed this a couple times to make make sure firmware wasn't the issue )
Spoiler: show
Also here's the output when it fails:
Spoiler: show